Tube and Profile Roll Bending Machine

Profile bending machine is a machine used to perform cold bending on profiles with different shapes and sizes. Usually, the machine is used in the metalworking field to bend profiles like tubes, bars, angles, “T” profiles, “U” profiles, and beams. The most important part of the machine is the rolls (normally 3) that apply a combination of forces on the profile, the resultant of which determines a deformation, along a direction perpendicular to the axis of the profile itself.

The maximum bending modulus of the profile (cm³)162

Bending speed (m/min) 53

Profile yield limit (MPa) 25

Angle steel incurvation:

Max. section size(mm) 80*85

Min. bending diameter(mm) 650

Min. section size(mm) 30*3

Min. bending diameter(mm) 550

Angle steel excurvation:

Max. section size(mm) 80*85

Min. bending diameter(mm) 800

Min. section size(mm) 30*3

Min. bending diameter(mm) 550

Channel steel excurvation:

Max. section size (mm) 12

Min. bending diameter (mm) 800

Channel steel excurvation:

Max. section size (mm) 12

Min. bending diameter (mm) 900

Flat steel horizontal bending:
Max. section size(mm) 15025
Min. bending diameter(mm) 700
Flat steel vertical bending:

Max. section size(mm) 75*12

Min. bending diameter(mm) 760

Round pipe bending:

Max. section size(mm) 76*4.5

Min. bending diameter(mm) 750

Round steel bending:

Max. section size(mm) 52

Min. bending diameter(mm) 600

Square pipe bending:

Max. section size(mm) 60*4

Min. bending diameter(mm) 900

Motor power(kg) 5.5

Dimension(mm) 1200*1700*1400

Weight(kg) 3200