Water Treatment,
Desalination,
Purification Systems

Principle:
Raw water pump→ mechanical filter(quartz sand filter)→ activated carbon filter→ security filter→ high pressure pump →reverse osmosis system→ Ozone sterilizer (UV sterilizer).
1. Water tank: storage of tap water, to solve the problem of insufficient tap water pressure and the back booster pump due to the impact of insufficient water, reduce the failure rate
2. Booster pump: equipped with a stainless steel pump, to provide sufficient pressure for subsequent filtration
3. Quartz sand filter: mainly remove the mud, suspended solids and large particles in the tap water
4. Carbon filter: mainly remove organic substances, residual chlorine and odor in tap water
5. Water softener filter: mainly remove the calcium and magnesium in tap water, reduce the hardness of water
6. Security filter: further filtration, protection of reverse osmosis membrane
7. High pressure pump: provide enough pressure for reverse osmosis system
8. Reverse osmosis unit: the core part of pure water equipment, the production of high-purity water.
9. Pure water tank: storage pure water, can change the size of the water tank,after the below process,The water result is pure enough for different application.

Capacity L/hr 120 - 1500 (customizable)

GPD 800 - 9000 (customizable)

Reverse Osmosis Water Machine is suitable for the domestic water and the underground water. It can remove the ions and small molecular weight organic compounds, such as bacteria, viruses, such as pyrogen.Reverse osmosis device is the raw water after quartz sand filter, activated carbon filter, softening filter, precision filter,etc., and then through the pressure pump, use the aperture for 1/10000 microns (1/6000 of 1/6000 of the size of e. coli, virus)
Core Components: Pressure vessel, Pump, Motor, PLC
Productivity: 1000L/Hour
Weight (KG): 350 kg
reverse osmosis plant: 1000LPH
salt rejection: 99.9%
produced water: 1000LPH
RO Membrane: MR-BW-4040
Temperature: 5-35 degrees

Oil Water Separator Wastewater Plant Treatment DAF Dissolved Air Flotation is an efficient flotation method for water clarification. The term refers to the method of producing flotation by dissolving air in the water under pressure and then releasing the pressure. When the pressure is released the solution becomes supersaturated with air as millions of small bubbles form. These bubbles attach to any particles in the water causing their density to become less than that of water. The particles then rapidly float to the surface for collection and removal, leaving the clarified water behind.
Features
1. Flow rate of one set: 1-300 m³/h.
2. Recycle flow dissolved air flotation.
3. High efficiency pressurization system providing high quantity dissolved-air water to create large
quantities of small bubbles.
4. Custom design on different dissolved air flotation equipment and recycle flow ratio according to
the type of wastewater and treatment requirement to achieve target removal effect and stability.
5. Adjustable stainless steel chain type skimmer to suit the different quantity of sludge.
6. Integrated coagulation tank and or flocculation tank and cleaning water tank(as optional)is
available to save the space and cost.
7. Automatic and remote controllable.
8. Material of construction: carbon steel epoxy painted, carbon steel FRP line, SS304/SS316L
Productivity 500L/Hour
Weight (KG) 1500 kg

1. Use reverse osmosis membrane separation technology to desalinate seawater.
2. reverse osmosis desalination process does not need to be heated to seawater, operating at normal temperature, without phase change, so the energy consumption is low and the water cost is low.
3. this product fully considers the special design of ship's particularity.Small size, light weight, easy to install and easy to install, it can be installed in the narrow and crowded cabin, deck, crew cabin, corridor and so on.The rack pipes are made of stainless steel and corrosion resistant materials.The power supply is wide (220V (440) / 60HZ, 380V / 50HZ)
4. easy to operate and easy to maintain.As long as there is electricity, there is sea water, the start can supply fresh water immediately.Reverse osmosis membrane desalination rate is high, stable performance, safe and reliable.The water quality is in line with the standard of drinking water quality (gb5749-8
5. No chemical can be added, but it can be directly consumed and sweet.
6.the seawater desalination machine is in the same technical and quality level as the small Marine desalination machines produced by countries such as the United States and Japan.
Flow rate 100L/H
Recovery rate 15%
Voltage 220V,50Hz
Power 1.9KW
Feed water TDS < 45000ppm
Output water TDS < 600ppm
Working pressure <1000psi
Working temperature 5-45℃
Feed water residual chlorine < 0.1ppm
Feed water SDI < 5
Feed water turbidity < 1
Feed water PH Neutral
Equipment size 1100*500*500(mm)
Equipment net weight 80Kg

1.Produce water continuously and high degree automation.
2.No need chemical to regenerate, easy operation and maintenance.
3.Core components of ro system are imported USA DOW membranes.
4.Automatic switch on when low water level, and switch off when high water level
5.System flushes RO membranes automatically, reducing membranes polluted speed.
6.Water shortage protection for multi-stage pump
7.Product water conductivity meter can monitor water quality online continuously.
8.Low operation cost and long life span

Product Water Flow 1 m3/h

TDS of Raw Water(≤) 38000 mg/L

TDS of Product Water(≤) 1000 mg/L

Recovery Rate(≥) 20 %

Desalination Rate(≥) 98.00 %

Rated Power 11.95 KW

Operating Power 5.98 KW

Operating Temperature 25~35 ℃

Operating PH 6~9

Free Chlorine of Raw Water (≤) 0.1 mg/L

Operating Pressure (≤) 6 Mpa

Voltage 380 V

Frequency 50 HZ

Phase 3 ph

Size 2.8(L)×1(W)×2(H) m