Industrial CT Scanning Systems
Is industrial computerized tomography scanner, the basic principle is based on the attenuation and absorption characteristics of radiation in the detected object. Industrial CT will be more complicated in function, not only to diagnose machine or part problems, but also to accurately measure various sizes and tolerances, and the measurement accuracy will be higher, reaching the micron level.
- Electronic X-ray inspection equipment.- High precision marble base with whole board.
- Automatic loading and unloading system on the front of sample table
- Universal CT for auto parts.
- Suitable for PCB/SMT/BGA semiconductors, etc.
- Can be used for special inspection equipment for electrical and electronic parts.
- Optimized user interface and image filter.
- Confirm images quickly and clearly.
- Based on GPU(graphics processing unit) can provide ultra-high speed scanning.
- Automatically detect bubbles and bad functions.
- Provide real-time reconnaissance and fast scanning, and quickly provide CT data.
- CT rotating precision up to 10μm.
- The earliest demonstration center with 450KV high power output X-ray.
Coordinate Measuring Machines
The coordinate measuring machines, abbreviated as CMM, support multiple reporting styles, including graphical measurement reports, Excel measurement reports, text formats, etc.
Electromechanical Universal Testing Machines (5-600 kN)
Applicable for wide range of tensile compression, bending and shear test for metal, nonmetal, composite materials, medicine, food,
wood, plastic material, waterproofing materials, insulation materials, wire and cable, paper, film, rubber, textile and aerospace
material etc.
Fatigue Testing Machines
Fatigue tests include the following types, which are classified by the form of the applied load, environmental factors, etc.
Tension-compression fatigue tests
Evaluation of endurance (fatigue strength) against cyclic stress by using a combination of tension, unloading and compression.
High cycle fatigue test: Normal fatigue test at frequencies up to approximately 1-5000 Hz.
Low cycle fatigue test: Fatigue test using a slow strain rate at frequencies of less than about 10 Hz.
Gigacycle fatigue test : Fatigue test in which approximately 1 × 109 cycles or more are applied in a short time by ultrasonic vibration
Fatigue crack propagation testing machine
Evaluates the propagation rate of fracture crack under cyclic stress.
Plane bending fatigue testing machine
Torsional fatigue testing machine
Rotating bending fatigue testing machine
Simulated environment fatigue testing machine
Possible to perform fatigue tests in actual use environment, for example, in seawater.
Corrosion fatigue testing machine
Hydraulic Testing Machines (5-5000 kN)
Applicable for wide range of tensile compression, bending and shear test for metal, nonmetal, composite materials, medicine, food,
wood, plastic material, waterproofing materials, insulation materials, wire and cable, paper, film, rubber, textile and aerospace
material etc.
Specialized Testing Machines
Individual testing machines for testing unusual components and finished products. For non-standard testing processes.
Compression Testing Machines
Used to test the mechanical properties of all kinds of metal and non-metallic composites materials. To calculate the maximum compression loading, test force, fracture strength, yield strength, yield strength, tensile strength, breaking elongation, tensile modulus of elasticity and bending modulus of elasticity test data.
info@anytek.ae
Dubai
Al Muteena BC RES 1072 OFFICE 4C-06
Trade license:22780
